Life Style

6 Good Ways You Should Know on How to Sharpen a Knife

A SHARP KNIFE IS A SAFE KNIFE

It is much safer to have a sharpened knife than a blunt one. If you are in the middle of cutting something and it frees itself from your hand unexpectedly, there will most likely be an ongoing momentum that may slash you. It’s more dangerous if you use a blunt knife and apply additional force when cutting something than if you use a sharp knife. With a sharp knife you can cut and slice through things with ease.

6 Good Ways You Should Know on How to Sharpen a Knife

1

Sharpening with a Steel

The more you use a knife, the duller the edge gets which is why you need to sharpen it regularly. Also, the edge can and will turn either to the left or right; it all depends on the way you hold the knife when you’re slicing or cutting things. Always buy quality knives which are usually made with vanadium alloy, carbon or molybdenum, as they have great elasticity and can be realigned easily by using a sharpening steel.

Put the knife blade on the tip of your sharpening steel. Do this at an approximate angle of 20 degrees. Then pull your knife down across the steel with a little arch. In order for you to sharpen the other side of the blade, do the process again but this time on the back side of the steel. Repeat the second and third steps anywhere from two to ten times, switching between both left and right side of the blade. Please note that it is vital to do this at a 20 degree angle and run the blade along the steel at full length. The speed at which you do this plays no role in making your blade sharper.

2

Using a Whetstone or a Diamond Stone

If you happen to know what angle your knife is sharpened at, then it’s worth sharpening it at that same angle again. If you sharpen at a different angle, it may take you longer to smoothen out the rough edges. If you don’t know which angle your knife was sharpened at then you can ask your knife manufacturer or find out from a knife expert at a knife shop. This should help you determine the appropriate angle to sharpen your knife at.

3

Using a Coffee Mug for Quick Results

You may be surprised to know that a coffee mug can be used as a great substitute for a proper sharpening tool because the material it’s made from (ceramic) is a course to a point where you will be able to smoothen out the rough edges. Get hold of an old coffee mug and place it upside down.

Make sure you maintain a 20 degree angle and sweep both sides of the blade across the coarse part of the mug. Run the full length of the blade across the grit several times.

For the final sweeps, alternate between both sides of your blade. Run one side of the blade across the coffee mug and then get the other side and do the same. Repeat this for a few times.

Finish this process off by swiping your blade across a honing rod 6 to 8 times. This smoothens out any kinks or burrs in the blade.

4

Mousepads and Sandpaper

This is a very cheap method of sharpening a knife. All you need to do is attach some sandpaper to an old mouse pad and run the knife along the sandpaper at a 20 degree angle.

You can use this as a primary method for sharpening a knife or for finishing touches after you’ve used a Sharpmaker or a stone. If you are sharpening a dull knife, use a sandpaper with medium grit and sharpen away until you get a fine grit.

The space in a mouse pad lets you make convex edges. Refrain from re-profiling a beveled edge into a convex edge unless you have a lot of experience with sharpening knifes.

5

Pull-Through Sharpeners

You can find pull-through sharpeners for kitchen knives and also for field sharpening outdoors blades. Using this isn’t really a great method when you think about how to sharpen a knife though, because they never produce results that are consistent, they create burrs and they tend to pinch the blade.

6

Send It Out To A Professional

This is a great option because you won’t have to worry about whether or not your knife is sharpened properly. The best professionals don’t use a grinding stone because it takes away more material that needed from the blade, thus decreasing its lifespan. Although sending your knife to a professional can be quite pricey, it’s a great way to maintain your knife and its lifespan.

Related posts

How to Improve the Appearance of Scars, Straight From Derms

admin

How to Bail Someone Out of Jail

admin

Smart Ideas to Successfully Rent Out Your Condo

admin

Here’s Why Everyone Is Using NuFace Again

admin

How to Make the World a Better Place

admin

27 Low-Effort Ways to Remix Your Brown Hair

sam

Leave a Comment